Implementation of series resonant inverter to improve efficiency fluorescent lamps
The purpose of this paper is shows some design parameters of a series resonant inverter (SRI) half-bridge configuration applied in lamps, this circuit is novel compared with the inverter resonant in series-parallel circuit (SPRI), in actuality the resonant inverters SPRI are very used to supply the power needed in fluorescent lamps, . In order to analyze the behavior and efficiency, is implemented a circuit SRI to supply the energy needed in a fluorescent lamp 32W. The final results show a better efficiency with the proposed circuit compared to a classical SPRI.
T. Liang, C. Cheng, W. Shyu, and J. F. Chen, “Design procedure for resonant components of fluorescent lamps electronic ballast based on lamp model,” in Power Electronics and Drive Systems, 2001. Proceedings. 2001 4th IEEE International Conference on, pp, 618–622, vol.2.
J. Chang and G.W. Bruning “Analysis of the self-oscillating series resonant inverter for electronic ballasts” Power Electronics, 1999. IEEE Transactions on, pp, 533-540, Vol 14.
F. Tao, “Advanced high-frequency electronic ballasting techniques for gas discharge lamps,” Ph.D. dissertation, Virginia Polytechnic Institute and State University, 2009.
M. Rashid, POWER ELECTRONICS HANDBOOK. Elsevier Science, 2011, http://books.google.com.co/books id=eS1z95mzi28C.
. R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics (Second Edition), 2nd ed. Springer, 2001, http://www.amazon.com/exec/obidos/redirect?tag=
D. W. hart, ‘Power Electronic’, P. Hall, Ed. Pearson Education, 2001, first edition.
A. Maamoun, “An electronic ballast with power factor correction for fluorescent lamps,” in Electrical and Computer Engineering, 2000 Canadian Conference on, vol. 1, 2000, pp. 385–389 vol.1.
C. Moo, H. Cheng, T. Lin, and H. Yen, “Designing a dimmable electronic ballast with voltage control for fluorescent lamp,” in Industrial Electronics, 1999. ISIE ’99. Proceedings of the IEEE International Symposium on, vol. 2, 1999, pp. 786–791 vol.2.
C. Moo, H. Cheng, H. Chen, and H. Yen, “Designing dimmable electronic ballast with frequency control,” in Applied Power Electronics Conference and Exposition, 1999. APEC 99. Fourteenth Annual, vol. 2, 1999, pp. 727–733 vol.2.
C. Moo, Y. Chuang, Y. Huang, and H. Chen, “Modeling of fluorescent lamps for dimmable electronic ballasts,” in Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting, IAS ’96., Conference
Record of the 1996 IEEE, vol. 4, 1996, pp. 2231–2236 vol.4.
F. Wakabayashi and C. Canesin, “A high efficiency hpf-zcs-pwm sepic for electronic ballast with multiple tubular fluorescent lamps” in Applied Power Electronics Conference and Exposition, 2012. APEC 2012. Seventeenth Annual IEEE, vol. 2, 2012, pp. 924–930 vol.2.
C. Nascimento, J. Moia, and A. Perin, “A voltage source charge pump power factor correction electronic ballast for fluorescent lamp with no start-up capacitor,” in Power Electronics Specialists Conference, 2006. PESC ’06. 37th IEEE, 2006, pp. 1–7.
- There are currently no refbacks.
Copyright (c) 2016 TECCIENCIA